Connect with us


How To Make A TV In Minecraft



How To Make A TV In Minecraft

In Minecraft, While you can’t make a real working TV with channels, Players can make a decorative TV that will light up at the press of a button. This guide will help you how to make a tv in Minecraft. So read this article till the end. Let’s start to make a tv in Minecraft.

What are the required materials on How to make a tv in Minecraft?

Below is the list of items you need to make a tv in Minecraft :

  • 3 armor stands
  • 3 ender dragon heads
  • Stone blocks
  • 12 snow layers
  • 1 stone wall
  • Multiple Redstone blocks

How to make a TV in Minecraft?

Below is the step by step guide to making a TV in Minecraft:

Step 1: Firstly make sure you have gathered all the materials which we mention above.

Step 2: Now you have to make sure there is a hole in the wall that is 2 blocks wide but 3 blocks high. This will soon be extended to four blocks when the players punch an additional layer into the ground under the hole in the wall.

Step 3: After that players need to place six layers of ice on each side of the hole. So that it almost fills the hole, but not completely.

Step 4: In place, the armor stands in a hole covered with a layer of snow. However be aware that this can sink too deep and ignore the layers completely, and to prevent this players can put each stand in front of the hole, put a piston behind each stand, and then each piston Place a Redstone block next to the can give them power. Above that should stand in the hole and at the right height.

Step 5: Now you have to place an armor stand just behind the rightmost armor stand that is already in the hole as straight as possible.

Step 6: You have to place a stone wall to the left of the stand and a piston to its right.

Step 7: To activate the piston place a Redstone block that pushes the stand into the wall.

Step 8: Remove the wall, piston, and Redstone and your stand should be standing in the hole in the middle of both armors stands.

Step 9: Now you have to go around the other side of the wall and place two red stone blocks just in front of the armor stands of the hole.

Step 10: Place two pistons on the back of the Armor Stand and then place the red block near them to push the stand, into the hole in the middle of both Armor Stands, gluing them all together yet still.

Step 11: Now destroy the Redstone blocks on the other side of the wall.

Step 12: After that, you have to take your Three Ender Dragon Heads and place them in the same direction on the heads of the Armor Stands.

Step 13: Now go to the second set of blocks that are on top of the dragon heads and then you have to replace the terracotta blocks with two terracotta blocks.

Step 14: Replace terracotta blocks with pistons facing down on top of stone blocks.

Step 15: To activate said piston, replace those blocks on top of the piston with Redstone blocks.

Step 16: Now this will push all the blocks down, which the players will repeat a couple of times to get their desired result. Once this is done, you have to destroy the Redstone block, stone block, and piston and you should have your flatscreen TV.

Below we have mentioned many different guides on Minecraft:

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *