In Minecraft, Copper Golems were able to press copper buttons, a new variety that would be added to them if they were voted out. The Copper Golem was one of three mobs that people were able to choose from in Minecon Live 2021. The Copper Golem wanders around in random order by pressing the copper buttons. Along with Copper Golem, Glare and Elle, the Minecon Live 2021 mob vote was the third crowd. It was knocked out in the second round.
With the help of this guide, you will learn how to make a copper golem in Minecraft. Read this guide till the end. In this guide, we have covered all the required points to make a copper golem-like are the required materials and the steps. So follow this guide to make a copper golem in Minecraft.
What materials are required to make a copper golem in Minecraft?
Below is the list of items you need to make a copper golem in Minecraft :
- 45 x Cut Copper
- 18 x Cut Copper Slabs
- 22 x Blocks of Copper
- 2 x Cut Copper Stairs
- 2 x Blocks of Coal
- 1 x Red Sandstone Wall
how to make a copper golem in Minecraft
Below are the steps by steps process to make a copper golem in Minecraft :
Step 1: Firstly you need to place the four cut copper pieces in two 1×2 columns, with a block of space between them. And you have to place 7 cut copper slabs to fill the 3×3 space in the top half of the cut copper.
Step 2: Now you have to place 9 cut copper over the 3×3 space, followed by an additional layer of 6 cut copper (in 2×3 space) on the back half of the structure.
Step 3: Then you have to surround the front and sides of the top layer with 9 cut copper slabs.
Step 4: After that, you have to place 11 Cut Copper in an ‘M’ shape.
Step 5: Now you have to add 2 Blocks of Coal between the Cut Copper for the Copper Golem’s eyes. and after that, you have to cover the last layer with 13 more Cut Copper.
Step 6: On each gap for the eyelids you have to add a Cut Copper Stairs.
Step 7: Now, you have to put a layer of 15 blocks of copper on the top of the head of the Copper Golem.
Step 8: Next, Place a cut copper slab with 2 blocks of copper under it and a cut copper one. And then you have to repeat the same for the other side.
Step 9: Now, you have to attach a red sandstone wall to the middle of the highest layer and then close it with a block of copper to complete the Copper Golem’s antenna.
And it’s done!
Check out more guides on Minecraft below: